One question we are often asked is - can you install metal roofing over shingles?
YES. One big advantage to metal roofing is its light weight, which means metal roofing can be installed over an existing shingle roof. However, there are some things that you will want to check out before doing it this way. For one, you will need to check with your local building department and ask if this is an approved installation method. More than likely they won't just come out and say yes. They will want to make sure that the plywood that the existing shingle roof is attached to is in good shape, meaning it has no soft spots. The reason for this is so when the metal roof gets installed, that the screws have something to bite into. Can you image screwing a metal roof, or anything for that matter, into rotten wood? More than likely the screws won't hold and that is something you definitely don't want happening if you want your roof to stay on during one of those afternoon thunderstorms we get here in Florida.
The Florida building code, which is the minimum building standards that buildings have to be built to including roofing, says that you can't have more than two layers of roofing materials on a residential house. The reason for this is that most house trusses, when engineered and built, are designed only to hold so much roofing weight. If you were to put too many layers of roofing materials on a house, there would be a good possibility of the trusses failing. Some counties and municipalities require you to remove the existing roof regardless if it is the only layer of roofing on your house. This way the building department knows that the plywood is in good condition and can be reused for another roof.
So when we talk about metal roofing over shingles, how does it work? There are really two ways to install a metal roof over a shingle roof. The first way is to run new underlayment over the existing shingle roof completely covering the old roof. This provides a couple of benefits. The first one being that the new underlayment will act as a second line of defense in case water would to somehow get underneath the metal roof. The second benefit would be that it acts as a buffer between the back of the metal roof and the shingle roof. The reason why this is important is because a shingle roof is granulated, very similar to sandpaper. On has the metal expands and contracts due to weather changes, the metal will actually move. Over time if there wasn't a buffer in between, the shingle granules would wear away at the back of the metal roofing panels.
The second way to install a metal roof over a shingle roof is with the use of purlins or battens. The purlins are screwed or nailed down to the roof deck, depending on how the metal roofing manufacture has testing for their roofing panels, and then the metal is installed to the purlins. This method has its benefits as well. The purlins give the installer a flat surface to install the metal roofing panels down to without the irregularities a shingle provides. The metal will be attached to at least 3/4" purlin and 1/2" plywood instead of just 1/2" plywood, which should make the overall roofing system stronger.
But the probably best benefit that comes from using purlins is the air gap it creates from the metal roof and the existing shingle roof. As the metal roof heats up in the summer time, the added air gap in between will act as a buffer instead of the the metal heating up the below shingle roof. This installation method also allows you the flexibility of adding a radiant barrier under the metal roof to help with heat transferring into the house, which should help the air conditioner from running as much.To summarize this article, always check with your local building department before starting any roofing project. They will be able to tell you what you can and can not do. From there you have a couple of different installation methods to choose from, either fastened to the existing roof or through the use of purlins. Whatever way you decide, you want to make sure you or whoever you pay to have it done does it the right way. Feel free to browse our installation manual for more information.
Let Us Help
Make Your Next Roof Your Last!
Our helpful metal roofing experts are just a click or call away! With five locations to serve you in Trenton, Live Oak, Ocala, Brooksville, and Tallahassee we're ready to help with your metal roofing needs.Get Started Today
Great Products: We only use high quality materials for our metal roofing products including a superior coating for our painted panels.
Great Finish: We use a superior exterior finish from Valspar®, the industry's best and strongest SMP coil coating system, offering superior color stability, chalk resistance, and fade resistance.
Great Service: Our staff have a heart for service and you'll enjoy an outstanding purchase process regardless if you are a homeowner client or a contractor customer.
Panel Selection: All of our panels and trim are made locally in our Trenton, Florida manufacturing facility. We have several panel options to choose from.
Accessories: Accessories for your metal roofing project can be the missing link between a so-so project and a successful, quality metal roofing project. We have all the metal roofing accessories you'll need!