Titebond Weather Master Metal Roof Sealant
Titebond Weather Master Metal Roof Sealant is used mainly for fixing leaks in metal roofing. Most of the top metal roofing contractors, such as Tri County Metals, prefer the Titebond Weather Master as their choice of sealant to ensure that the house remains protected.
What causes roof leaks?
The major reason behind leaks in metal roofing is the movement of the fastener from its place. Shocks, mostly thermal ones, cause the fastener to lose which in turn causes them to back out.
Due to the change in temperature during winters to summers, the panels constantly contract and expand. This causes the holes to become larger, and as a result, the panels start to get lose. As a result, the panels of metal roofing start to lift up which allows the moisture to travel through the edges of the panels. This leads to the appearance of leaks much further away from the source because of which they become quite difficult to locate as well.
Previously, people used painting fasteners as a solution for this problem. However, using painting fasteners made the roof appear unsightly. Additionally, the seal was also very unsatisfactory and didn’t last for long.
How the Titebond Metal Roof Sealant Works?
The sealant by Titebond not only helps the person in getting rid of the problem, but is also very easy to apply and lasts for a long time as well. The seal conforms to the head of the fastener. This creates a water tight seal, and the fastener is also secured tightly in place to the roof of the surface. This completely eliminates any screw movement as well as leaks.
You would no longer require fasteners that are oversized to fill in the elongated holes. Instead, all you would need to do is to remove the fastener that has become lose and then you can seal the hole with the Titebond Weather Master Metal Roof Sealant. You can also choose to install the fastener beside its original position and then seal it for complete protection.
About Titebond Weather Master Metal Roof Sealant
The sealant has been formulated particularly to outperform and outshine all of the other sealant technologies available in the market. These technologies include silicones, urethanes, VOC solvent, and tripolymers. The unique formula of the Titebond sealant makes it suitable for a vast range of applications including metal roof, downspouts, galvanized gutters, and metal sliding.
Advantages of the Titebond Weather Master Metal Roof Sealant
The sealant has some advantages over all of the other sealants. A few of them are mentioned below:
- It provides a seal which is weather-tight against dirt, water, dust, and the wind.
- Provides exceptional adhesion to numerous standard materials including metal, plastic, glass, aluminum, galvanized surfaces, and steel.
- Incomparable adhesion to common building materials like masonry, wood, and PVC.
- The sealant can be painted with latex-based paint after an hour of the application so that the roof looks even.
- The sealant is UV resistant and extrudes in the most extreme of weather conditions thus making it suitable for exterior use.
- It is VOC compliant.
All of the features that the Titebond Metal Roof Sealant has made it a highly recommended item by Tri County Metals to ensure that your house remains protected through efficient metal roof installation.